1100nm SLED Broadband Light Source Specification

800-1100nm SLED Light Source and 4 Channels Optical Power Meter (above) Description: 1100nm SLED Broadband Light Source, central wavelength 1100±20 nm, -3dB spectrum width ≥ 60 nm, output power ≥10 mW. Other Central wavelengths are available like 980 nm, 1050 nm, etc. OEM model is well available on customer’s special request.     Applications: Optical fiber sensing Optical fiber passive component spectrum testing Optical fiber grating, filter testing Optical fiber measurement equipments   Features: Selected wavelength High spectral stability Broadband light source   Specifications: Parameters 1100 SLED Central wavelength (nm) 1100±20 -3dB spectrum width (nm) ≥60 Output power (mW) ≥10 Output power short-term stability (dB) 1 ≤±0.01dB/15 min Output power long-term stability (dB) 2 ≤±0.03dB/8 hour Operating mode CW, internal modulate, external modulate Fiber pigtail Single mode SMF-28 Output connector FC/PC, FC/UPC or FC/APC, etc Operating temperature (℃) 0 ~ 40 Storage temperature (℃) -20 ~ 70 Power supply +5V DC; >500mA; △V＜1%(Module); AC 110/220V±10%, 50Hz, 20W(Desk-top) Dimensions (L×W×H, mm) 90×70×19(Module); 320×220×90(Desk-top) Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.                1. Test condition: fixed temperature, CW.                2. Test condition: temperature variation ±2℃, CW.   Typical Spectrum     Ordering Information OS-S Package Type Operating Wavelength Output Power LCD Display Power Adjustable Fiber Type Connector   M=Module  D=Desk-top 1100=1100nm 980=980nm 1050=1050nm etc 1=1mW   10=10mW      20=20mW etc   0=Without 1=With 0=Without 1=With S=SM Fiber P=PM Fiber M=MM Fiber FC/UPC     FC/APC etc Note: LCD display is to display wavelength and output power. 1270nm SLED Broadband Light Source Specification   Description: 1180nm SLED Broadband Light Source, central wavelength 1180 nm, -3dB spectrum width ≥ 25 nm, output power ≤ 1.0 mW. Other Central wavelengths are available like 980 nm, 1050 nm, etc. OEM model is well available on customer’s special request.   Applications: Optical fiber sensing Optical fiber passive component spectrum testing Optical fiber grating, DWDM, filter testing Optical fiber measurement equipments   Features: Selected wavelength High spectral stability Broadband light source   Specifications: Parameter SLED Central wavelength (nm) 1180 -3dB spectrum width (nm) ≥25 Output power (mW) ≥0.75, max 1.0 Ripple (dB) ≤0.15 Output power short term stability 1 ≤±0.05dB/15 min Output power long term stability 2 ≤±0.1dB/8 hour Operating mode CW Fiber pigtail Single mode SMF-28 Output connector FC/PC, FC/UPC or FC/APC, etc Operating temperature (℃) 0 ~ 40 Storage temperature (℃) -20 ~ 70 Power supply +5V DC; >500mA; △V＜1%(Module); AC 110/220V±10%, 50Hz, 20W(Desk-top) Dimensions (L×W×H, mm) 90×70×19(Module); 320×220×90(Desk-top) Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.                1. Test condition: fixed temperature, CW.                2. Test condition: temperature variation ±2℃, CW.   Typical Spectrum     Ordering Information OS-S Package Type Operating Wavelength Output Power LCD Display Power Adjustable Fiber Type Connector   M=Module  D=Desk-top 118=1180nm  etc 0.75=0.75mW    1.0=1.0mW    etc 0=Without 1=With 0=Without 1=With S=SM Fiber P=PM Fiber M=MM Fiber FC/UPC     FC/APC etc   Note: LCD display is to display wavelength and output power.   Description: 1270nm SLED Broadband Light Source, central wavelength 1270 nm, spectrum bandwidth 1200-1340 nm, output power ≥ 18 mW, power spectral density ≥-40 dBm/nm, ripple ≤0.35 dB. Other central wavelengths are available like 1310 nm, 1550 nm, etc. OEM model is well available on customer’s special request.   Applications: Optical fiber sensing Optical fiber passive component spectrum testing Optical fiber grating, filter testing Optical fiber measurement equipments   Features: High output power High spectral stability Broadband spectrum output   Specifications:                                  Parameter SLED Central wavelength (nm) 1270 Spectrum width (nm) 1200~1340 Output power (mW) ≥18 Spectral density (dBm/nm) ≥-40 Ripple (dB) ≤0.35 Spectral density stability ≤±0.08dB/15 min Output power short-term stability (dB) 1 ≤±0.05dB/15 min Output power long-term stability (dB) 2 ≤±0.1dB/8 hour Operating mode CW Fiber pigtail Single mode SMF-28 Output connector FC/PC, FC/UPC or FC/APC, etc Operating temperature (℃) 0 ~ 40 Storage temperature (℃) -20 ~ 70 Power supply AC 110/220V±10%, 50Hz, 20W Dimensions (L×W×H, mm) 90×70×19(Module); 320×220×90(Desk-top) Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.                1. Test condition: fixed temperature, CW.                2. Test condition: temperature variation ±2℃, CW.   Typical Spectrum     Ordering Information OS-S Package Type Operating Wavelength Output Power LCD Display Power Adjustable Fiber Type Connector   M=Module  D=Desk-top 1U=1U Rack 2U=2U Rack etc 1270=1270nm 1310=1310nm 1550=1550nm etc 1=1mW   10=10mW      50=50mW etc   0=Without 1=With 0=Without 1=With S=SM Fiber P=PM Fiber M=MM Fiber FC/UPC     FC/APC etc