980nm SLED Broadband Light Source Specification

980nm SLED and 1550nm DFB and 780nm Pump Light Source (above) Description: 980nm SLED Broadband Light Source, central wavelength 980±20 nm, -3dB spectrum width ≥ 30 nm, output power ≥ 2 mW. Other central wavelengths are available like 930 nm, 1050 nm, etc. OEM model is well available on customer’s special request.    Applications: Optical fiber sensing Optical fiber passive component spectrum testing Optical fiber grating, filter testing Optical fiber measurement equipments   Features: Selected wavelength High spectral stability Broadband light source   Specifications: Parameters 980 SLED Central wavelength (nm) 980±20 -3dB spectrum width (nm) ≥30 Output power (mW) ≥2 Output power short-term stability (dB) 1 ≤±0.01dB/15 min Output power long-term stability (dB) 2 ≤±0.03dB/8 hour Operating mode CW, internal modulate, external modulate Fiber pigtail Single mode SMF-28 Output connector FC/PC, FC/UPC or FC/APC, etc Operating temperature (℃) 0 ~ 40 Storage temperature (℃) -20 ~ 70 Power supply AC 110/220V±10%, 50Hz, 20W Dimensions (L×W×H, mm) 90×70×19(Module); 320×220×90(Desk-top) Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.                1. Test condition: fixed temperature, CW.                2. Test condition: temperature variation ±2℃, CW.   Typical Spectrum     Ordering Information OS-S Package Type Operating Wavelength Output Power LCD Display Power Adjustable Fiber Type Connector   M=Module  D=Desk-top 1U=1U Rack 2U=2U Rack etc 930=930nm 980=980nm 1050=1050nm   etc 1=1mW   10=10mW      50=50mW etc   0=Without 1=With 0=Without 1=With S=SM Fiber P=PM Fiber M=MM Fiber FC/UPC     FC/APC etc

1050/1063nm SLED Broadband Light Source Specification

Description: 1050/1063nm SLED Broadband Light Source, central wavelength 1050±10 nm, -3dB spectrum width ≥ 60 nm, output power 5, 10, 20 mW. Other Central wavelengths are available like 1270 nm, 1310 nm, etc. OEM model is well available on customer’s special request.   Applications: Optical fiber sensing Optical fiber passive component spectrum testing Optical fiber grating, DWDM, filter testing Optical fiber measurement equipments   Features: Selected wavelength High spectral stability Broadband light source   Specifications: Parameters 1050 SLED Radiation source SLED Central wavelength (nm) 1050±10 -3dB spectrum width (nm) ≥60 Output power (mW) 5, 10, 20, etc Power spectral density stability 1 ≤±0.05dB/15 min Short term stability 1 ≤±0.01dB/15 min Long term stability 2 ≤±0.03dB/8 hour Operating mode CW, internal modulate, external modulate Fiber pigtail Single mode 1060 Fiber Output connector FC/PC, FC/UPC or FC/APC, etc Operating temperature (℃) 0 ~ 40 Storage temperature (℃) -20 ~ 70 Power supply +5V DC; >500mA; △V＜1%(Module); AC 110/220V±10%, 50Hz, 20W(Desk-top) Dimensions (L×W×H, mm) 90×70×19(Module); 320×220×90(Desk-top) Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.                1. Test condition: fixed temperature, CW.                2. Test condition: temperature variation ±2℃, CW.   Typical Spectrum 1050nm SLED Broadband Light Source Spectrum 10mW @1052nm (above)   1050nm SLED Broadband Light Source Spectrum 20mW @1063nm (above)     Ordering Information OS-S Package Type Operating Wavelength Output Power LCD Display Power Adjustable Fiber Type Connector   M=Module  D=Desk-top 1U=1U Rack 2U=2U Rack etc 105=1050nm 131=1310nm 155=1550nm   etc 1=1mW   10=10mW      20=20mW etc   0=Without 1=With 0=Without 1=With S=SM Fiber P=PM Fiber M=MM Fiber FC/UPC     FC/APC etc 1100nm SLED Broadband Light Source Specification     800-1100nm SLED Light Source and 4 Channels Optical Power Meter (above) Description: 1100nm SLED Broadband Light Source, central wavelength 1100±20 nm, -3dB spectrum width ≥ 60 nm, output power ≥10 mW. Other Central wavelengths are available like 980 nm, 1050 nm, etc. OEM model is well available on customer’s special request.     Applications: Optical fiber sensing Optical fiber passive component spectrum testing Optical fiber grating, filter testing Optical fiber measurement equipments   Features: Selected wavelength High spectral stability Broadband light source   Specifications: Parameters 1100 SLED Central wavelength (nm) 1100±20 -3dB spectrum width (nm) ≥60 Output power (mW) ≥10 Output power short-term stability (dB) 1 ≤±0.01dB/15 min Output power long-term stability (dB) 2 ≤±0.03dB/8 hour Operating mode CW, internal modulate, external modulate Fiber pigtail Single mode SMF-28 Output connector FC/PC, FC/UPC or FC/APC, etc Operating temperature (℃) 0 ~ 40 Storage temperature (℃) -20 ~ 70 Power supply +5V DC; >500mA; △V＜1%(Module); AC 110/220V±10%, 50Hz, 20W(Desk-top) Dimensions (L×W×H, mm) 90×70×19(Module); 320×220×90(Desk-top) Remark: Stability is tested at room temperature 25±2℃ after pre-heating 30 minutes.                1. Test condition: fixed temperature, CW.                2. Test condition: temperature variation ±2℃, CW.   Typical Spectrum     Ordering Information OS-S Package Type Operating Wavelength Output Power LCD Display Power Adjustable Fiber Type Connector   M=Module  D=Desk-top 1100=1100nm 980=980nm 1050=1050nm etc 1=1mW   10=10mW      20=20mW etc   0=Without 1=With 0=Without 1=With S=SM Fiber P=PM Fiber M=MM Fiber FC/UPC     FC/APC etc Note: LCD display is to display wavelength and output power.